Click image to view full size image
White Color Powder Coating Aluminium Profiles Extruded Window frames 0.6mm-1.2mm Thickness / 6 Meters Length
Material and status:
.
| Material | Status |
| AA6061 | T6 |
| AA6063 | T5 |
Including but not only including the list above.
| Chemical Composition | 6063 T5 | ||||||||
| Si | Fe | Cu | Mn | Mg | Zn | Ti | Cr | Others | Total others |
| 0.2-0.6 | 0.35 | 0.1 | 0.1 | 0.45-0.9 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 |
| Mechanical property | |||||||||
| Yield Strength | Tensile Strength | Extensibility | hardness | ||||||
| 110Mpa | 160Mpa | 8% | 8 HW | ||||||
Descrition:
Powder Coating Aluminum profiles are the most popular material which is mainly applied in doors and windows for South American market, especially in Mexico and Columbia. The quality is much better than mill finished aluminum profile. Its life is much longer and surface is much more smooth and colorful.
It can also be applied in curtain, floor, solar energy, frame of light box, advertising industry, etc.
Aluminum Profile meter weight( kg/m) tolerance
- Wall thickness 1.2 : ±5% kg/m
- Wall thickness 1.0-1.1: ±7%kg/m
- Wall thickness 0.8-0.9: ±8%kg/m
- Wall thickness 0.6-0.7: ±10 %kg/m
- Wall thickness <0.6: ±12%kg/m
- Powder coated thickness: >50μm
Competitive Advantages:
- Cost: The whole production lines are adopted, produces the products begin from aluminum ingot, minimize the cost from every single step.
- Quality: The modern management and advanced equipments create the stable and super quality.
E.G: The most advanced aluminum rod homogenizing furnaces are adopted to make the aluminum rod more stable.Use spray cooling method which is much better than sink into the water.Vertical full automatic powder coating line with double spraying process make sure the coating thick
Extrusion Powder Coating Aluminium Profiles , 0.6mm-1.2mm Thickness
